How to Remove Limescale From Taps and Shower Heads

Do you want to remove limescale from taps before it ruins the look of your washrooms? White, chalky deposits on taps and shower heads are one of the quickest ways to make a clean office look neglected. Whether you have mixer taps, pillar taps, sensor taps, push taps, spray taps, or chrome, brass or stainless steel finishes, or fixed, handheld, rainfall or thermostatic shower heads, scale is noticed straight away in staff washrooms, kitchens, changing rooms and shower facilities.

In a commercial building, limescale builds up faster than most people expect. In hard water areas, minerals are left behind every time a tap is used, and the busier the building, the quicker the deposits form. R3 provides professional office cleaning in Manchester and can remove limescale quickly with minimal disruption to your business. If you’d rather tackle it in-house or you’re working to a budget, follow our step-by-step DIY guide below to remove limescale from taps and shower heads.

How to Remove Limescale From Taps and Shower Heads in 7 Steps

Limescale is a mineral deposit left behind when hard water evaporates. The easiest way to remove limescale from taps is to match the product and contact time to the finish, starting gently and building up only if needed.

Step 1: Check the finish and the product

Chrome, brass, stainless steel and coloured coatings all react differently to acid. Check the manufacturer’s guidance for both the fitting and the descaler, and test on a small, hidden area first. Keep descaler away from natural stone surrounds and rubber seals, which acids can mark or damage.

Step 2: Plan the work and stay safe

Work during a quiet period, put up wet floor signs and ventilate the area. Wear gloves and eye protection, and check the safety data sheet for every product as part of your COSHH assessment. Never mix cleaning products. Acidic descalers combined with bleach can release dangerous chlorine gas.

Step 3: Wipe away loose dirt

Wipe the taps and shower heads with a damp cloth and a little neutral cleaner to remove soap film and grime, so the descaler can work on the scale itself.

Step 4: Apply the descaler

To remove limescale from taps, use a descaler designed for bathroom fittings and apply it as directed. R3FM also supplies professional descalers for this job. For light scale, a cloth soaked in the product and wrapped around the tap holds it in place. Leave it for the time on the label and no longer, as extended contact can dull chrome.

Step 5: Soak the shower heads

If the shower head unscrews, remove it and submerge it in descaler diluted as directed. If it is fixed, fill a bag with the solution and secure it around the head with an elastic band. Keep soak times short on plastic and rubber nozzles.

Step 6: Scrub gently

Loosen the softened scale with a soft brush or old toothbrush, and clear each spray nozzle. Never use wire brushes, steel wool or abrasive pads, as these scratch the finish and give scale more to cling to.

Step 7: Rinse and polish

Rinse thoroughly with clean water to remove all acid, and run the shower through for a minute to flush the nozzles. Buff dry with a microfibre cloth for a streak-free shine, then refit the shower head.

What if the limescale won’t come off?

Thick, old scale may need repeated treatments, and scale inside sensor taps, thermostatic mixers and flow straighteners can’t be cleaned from the outside. In commercial buildings, shower heads should be cleaned and descaled regularly as part of your legionella risk assessment. If you still can’t remove limescale from taps and showers, a professional should deal with it.

How to stop limescale coming back

Wipe taps dry after cleaning and add descaling to your regular office cleaning schedule, so it is far easier to remove limescale from taps before it builds up. Fix dripping taps promptly, as drips leave scale behind. In hard water areas, a water softener or scale inhibitor can reduce the problem at its source.

When to call a professional

DIY works well for light scale and routine upkeep. For large buildings, multiple washrooms, sensor taps, shower facilities or premises that need to stay open, R3’s professional office cleaning in Manchester has the equipment and training to get the job done safely and consistently, with minimal disruption to your business. Book now and get a free quote.

Next
Next

5 Steps to Remove Coffee Stains From Office Carpets